Wood stove blowers solve one simple problem: heat that rises to the ceiling instead of reaching your couch. After comparing fit, airflow, noise, and control options across 14 models, the Hiorucet CB36 with thermostat stands out as the best overall pick because the thermal switch automates operation and the fit list covers many of the most common steel plate stoves. The US Stove Vogelzang HR-6 Heat Reclaimer is the standout for anyone whose stove lacks a blower mount entirely, since it installs in the flue pipe instead, while the Parts Kit DN104 (S31105) makes the most sense as a direct, budget-friendly replacement for older GHP Group and Majestic units. The main tradeoffs in this category come down to exact stove compatibility versus universal fit, wired-in versus plug-in installation, and how much noise you’ll tolerate for more airflow. Keep reading for the full breakdown.
Get backup power and energy gear delivered free — and shop member deals
- Fast, free delivery on millions of items
- Access to Prime Big Deal Days deals on October 6–7
- Prime Video, Amazon Music and more included
Key Takeaways
- Compatibility, not performance, is the deciding factor here: most blowers in this roundup are brand-specific (CB36 fits US Stove/Ashley/King, AC-16 fits Englander, S31105 fits GHP/Majestic), so the ‘best’ blower is the one made for your stove model.
- Thermostat-equipped models like the Hiorucet CB36 kit ranked higher than bare blower replacements because automatic on/off switching prevents the motor from running when the stove is cold and extends blower life.
- The Vogelzang HR-6 is the only true retrofit option — it works with any 6-inch flue pipe stove and pulls heat from exhaust gases rather than convection, making it the go-to for stoves with no blower bay at all.
- The universal options (squirrel cage high-velocity fan, KUNRISE centrifugal fan, Dayton draft fan) trade drop-in fit for versatility and are better suited to DIY setups, outdoor furnaces, and even charcoal ignition than stove-specific replacements.
- Several products are functionally duplicates — three AC-16 Englander blowers and two S31105 units appear under different brands — so checking plug type, cord length, and mounting hardware, not just the model number, separates the better versions.
- Noise is the recurring tradeoff: high-CFM squirrel cage designs move the most air but are loud enough to matter in a living room, while lower-CFM circulator blowers like the CB36 run quieter at the cost of airflow.
| wood stove blower | Voltage | Wattage | Speed | Airflow |
|---|---|---|---|---|
| Parts Kit DN104 Speed Variable | 110–120 V | 25 W | 2,800 RPM | Not specified |
| Squirrel Cage Blower Fan | 110 V | 120 W | 2,600 RPM | 196 CFM |
| Criditpid Centrifugal Blower F | 115 V | — | 3,000 RPM | Not specified |
| US Stove Vogelzang HR-6 Heat R | 20.4 V (listed; conflicts with product description) | 20.4 W (listed) | — | 130 CFM |
| Criditpid CB36 Circulator Blow | 120 V | 31 W | — | 100 CFM |
| DAYTON 1TDP7 PSC Blower | 115 V AC | 86.25 W | — | 146 CFM |
| Hiorucet CB36 Wood Stove Blowe | — | 31 W | — | 100 CFM |
| Replacement Wood Stove Blower | 110–120 V | 25 W | 2,800 RPM | — |
| Quiet Wood Stove Blower Fan fo | 115 V | 92 W | 3,000 RPM | — |
| Hiorucet Speed Variable PBAR-2 | 110–120 V AC | 35 W | 3,200 RPM | — |
| Pleasant Hearth Stove Blower | — | — | — | — |
| KUNRISE BBQ 97mm × 33mm Blower | — | — | — | — |
| AC-16 Wood Stove Convection Bl | 115 V | 92 W | 3000 RPM | — |
| Criditpid AC-16 Wood Stove Con | 115 V | — | 3000 RPM | — |
More Details on Our Top Picks
Parts Kit DN104 Speed Variable S31105 Blower 110V ~ 120V Replacement for GHP Group, Monessen/Majestic, CFM US Century Plate Steel Freestanding Wood Stove Fireplace
For owners of a compatible GHP Group, Monessen/Majestic, Dutchwest Windsor, or CFM US Century stove, this blower is the most targeted fit in this group. Its predrilled mounting layout, four included screws, and heat gasket make it a more direct replacement choice than the general-purpose Criditpid Dayton-style motor, which is sold without vane ducts or a thermostat. The manual variable-speed control lets you adjust circulation to the room, while the 6-foot cord gives some placement flexibility. The tradeoff is its narrow model compatibility: the long list of stove numbers still needs to match your unit, and the product data gives no airflow rating. Skip it if you need a universal fan or want a stated CFM figure to compare with the CB36’s 100 CFM.
Pros:- Lists compatibility across several specific stove brands and model families
- Manual variable-speed switch allows airflow adjustment
- Includes four mounting screws and a heat gasket
- Six-foot cord and rear-mount layout are specified
Cons:- Compatibility is limited to listed stove models and mounting dimensions
- No CFM figure is provided
- Plastic blades may be less suitable for buyers seeking an all-metal fan
Best for: Owners of a listed GHP, Monessen/Majestic, Dutchwest Windsor, or CFM US Century plate-steel stove seeking a model-specific replacement blower.
Not ideal for: Owners of unlisted stoves or buyers who need a published airflow rating before choosing a blower.
- Voltage:110–120 V
- Wattage:25 W
- Speed:2,800 RPM
- Airflow:Not specified
- Overall length with guard:9.5 in
- Height:5.25 in
- Depth:3.75 in
- Cord length:6 ft
- Control:Manual variable speed
Our verdict“Choose this blower when your stove matches the listed models and you want a variable-speed replacement with mounting hardware included.”
Squirrel Cage Blower Fan, Wood Boiler Blower, Furnace Fan, High Velocity
This is the lineup’s utility-first centrifugal blower: its stated 196 CFM and 350 Pa static pressure suit installations where air must move through a duct or against resistance. That makes it a different proposition from stove-specific replacements such as the CB36, which lists compatibility with named US Stove, Ashley, King, and Vogelzang models and a lower 100 CFM rating. The metal shell, protective grille, and IP54 rating add practical protection for workshop or ventilation setups. But this fan is not presented with a stove-specific mounting kit, thermostat, or variable-speed control, so adapting it to a wood stove may take extra work. Its 72 dB noise level also makes it a poor fit for anyone prioritizing quiet room circulation.
Pros:- Stated 196 CFM airflow and 350 Pa static pressure
- Metal housing and protective grille
- IP54 dust and splash resistance rating
- Compact centrifugal format suits ducted utility applications
Cons:- No stove model compatibility or mounting kit is specified
- Single speed offers no airflow adjustment
- 72 dB noise level may be intrusive in living spaces
Best for: DIY owners building a ducted or utility air-moving setup who need stated airflow and static pressure more than a stove-specific fit.
Not ideal for: Buyers seeking a quiet, ready-to-install replacement for a named stove model or a blower with adjustable speeds.
- Voltage:110 V
- Wattage:120 W
- Airflow:196 CFM
- Static pressure:350 Pa
- Speed:2,600 RPM
- Noise level:72 dB
- Speed settings:1
Our verdict“Pick this for a custom high-pressure air-moving installation, provided you can handle the fit and noise tradeoffs.”
Criditpid Centrifugal Blower Fan Motor Replacement for Dayton 1TDN7, 4C440, 1C180, Fasco 50747-D401, 7121-3466 Wood Furnace Blower Fan.
Unlike the room-circulation role of the Criditpid CB36, this model is a centrifugal motor replacement aimed at draft-inducer and furnace applications. Its 1/25 HP motor runs at 3,000 RPM, and the adjustable inlet cover can regulate intake volume; that gives a compatible setup a way to control output without a stated multi-speed switch. The cross-reference list spans Dayton and Fasco models as well as several stove and furnace applications, including Shaver wood furnaces. The main buying risk is fit: the description says the motor replacement does not include vane ducts or thermostats, and it does not supply CFM data. Choose it when matching an existing assembly by part number; the CB36 is the clearer option for buyers replacing a complete circulation blower.
Pros:- Cross-references multiple Dayton and Fasco model numbers
- Adjustable inlet cover can regulate intake airflow
- Compact 1/25 HP motor runs at 3,000 RPM
- One-year warranty is stated in the description
Cons:- Vane ducts and thermostat are not included
- No airflow capacity is listed
- Requires careful part-number and assembly compatibility checks
Best for: Owners or repair technicians replacing a compatible Dayton or Fasco centrifugal draft-inducer motor by its existing part number.
Not ideal for: Buyers who need a complete room-circulation blower, included vane ducts, thermostat, or a published CFM rating.
- Voltage:115 V
- Current:0.45 A
- Frequency:50/80 Hz (as listed)
- Horsepower:1/25 HP
- Speed:3,000 RPM
- Airflow:Not specified
- Included components:Motor replacement; vane ducts and thermostat excluded
- Warranty:One year (as stated)
Our verdict“Choose this motor for a matching draft-inducer assembly, while buyers after a complete circulator should look at the CB36 instead.”
US Stove Vogelzang HR-6 Heat Reclaimer, Fully Automatic Quiet 130 CFM Blower, Fully Sealed from Flue Gasses, Compatible with all Wood or Coal Stoves, 6 Inch Diameter Flue Pipe
The HR-6 differs from the other picks by fitting onto a 6-inch stove pipe to reclaim heat that would otherwise leave through the flue. Its thermostat switches the fan on at 160°F and off at 130°F, so it runs in response to pipe temperature instead of relying on the manual adjustment found on the DN104. The listed 130 CFM is also higher than the CB36’s 100 CFM, though the two move air from different positions and are not direct substitutes. A sealed design and stated UL motor testing address concerns specific to a flue-mounted unit. The compromise is equally specific: this is an attached heat reclaimer, not a rear-mounted stove blower, and it only fits the stated 6-inch pipe size. Product data also contains conflicting voltage and wattage fields.
Pros:- Reclaims heat at the flue rather than only circulating air from the stove body
- Thermostat turns on at 160°F and off at 130°F
- Listed 130 CFM airflow
- Description states the unit is sealed from flue gases and has a UL-tested motor
Cons:- Requires a 6-inch flue pipe
- One speed provides no manual airflow adjustment
- Listed electrical specs conflict: 20.4 W and 20.4 V
Best for: Wood- or coal-stove owners with a compatible 6-inch flue pipe who want automatic, temperature-triggered heat recovery.
Not ideal for: Buyers needing a conventional rear-mounted circulation blower, variable speed, or compatibility with a different flue diameter.
- Flue pipe diameter:6 in
- Airflow:130 CFM
- Thermostat on temperature:160°F
- Thermostat off temperature:130°F
- Speeds:1
- Noise level:5 dB (listed)
- Wattage:20.4 W (listed)
- Voltage:20.4 V (listed; conflicts with product description)
Our verdict“Choose the HR-6 if your stove has a 6-inch pipe and you want automatic flue heat recovery rather than a standard stove-mounted blower.”
Criditpid CB36 Circulator Blower Fan for US Stove, Ashley, King, Vogelzang Wood Stoves.
For buyers whose stove appears in its compatibility list, the CB36 is the most straightforward complete circulation replacement here. It names a broad range of US Stove, Ashley, King, and Vogelzang models and includes mounting hardware, while the DN104 focuses on GHP, Monessen/Majestic, and CFM stove families. Its 100 CFM output and 31 W draw describe a modest, single-speed fan for moving room air; the HR-6 lists greater airflow but attaches to the flue and serves a different purpose. Check the model and version carefully: the description says brown 2621 Wonderwood units may need modification, and the long compatibility list does not guarantee every variation fits. There is no thermostat or speed control listed, so buyers who want automatic operation should compare the Hiorucet CB36 thermostat model in the broader lineup.
Pros:- Broad model list across US Stove, Ashley, King, and Vogelzang
- 100 CFM airflow is specified
- Includes mounting hardware
- Three-prong cord is 80 inches long
Cons:- Single-speed operation with no thermostat listed
- Brown 2621 Wonderwood versions may require modification
- Plastic material is specified, with limited build detail
Best for: Owners of listed US Stove, Ashley, King, or Vogelzang models who want a complete, single-speed replacement circulation blower.
Not ideal for: Owners of unlisted stove variants, buyers unwilling to modify a brown 2621 Wonderwood unit, or anyone requiring thermostat control.
- Voltage:120 V
- Frequency:60 Hz
- Airflow:100 CFM
- Wattage:31 W
- Speeds:1
- Cord length:80 in
- Replacement part numbers:CB36, 69354, 80442, 891492
- Warranty:One year (as stated)
Our verdict“Pick the CB36 for a listed stove that needs a basic complete circulator, and verify the exact model and finish before ordering.”
DAYTON 1TDP7 PSC Blower, Black, Draft Fan, 115 Volt, 146 CFM, Outdoor Wood Furnace Fan
The DAYTON 1TDP7 is the lineup’s purpose-built draft fan for an outdoor wood furnace, rather than a room-circulation kit for a freestanding stove. Its 146 CFM rating exceeds the 100 CFM listed for the Hiorucet CB36, but airflow figures alone do not make the two interchangeable: this Dayton is intended for furnace draft, while the CB36 circulates room air and includes a thermostat and stove-mount hardware. The Dayton includes a discharge mounting flange and has a compact 6-by-6-by-5-inch body, which suits buyers replacing a matching furnace component. Its key limitation is control compatibility: the listing says not to use it with speed controllers, and it does not provide the thermostat convenience of the CB36. Choose it when the furnace application and mounting match; skip it for a typical indoor stove blower replacement.
Pros:- 146 CFM capacity is the highest stated airflow among these five products.
- Includes a discharge mounting flange for a compatible installation.
- UL recognized in the USA and Canada and carries a CE mark.
- Compact listed dimensions of 6 x 6 x 5 inches.
Cons:- Not for use with speed controllers, limiting speed adjustment options.
- Designed for outdoor wood furnace draft applications rather than general room circulation.
- The listing gives no thermostat or variable-speed control.
Best for: Outdoor wood furnace owners replacing a matching 115-volt draft blower who need a listed 146 CFM unit with a discharge flange.
Not ideal for: Freestanding wood stove owners seeking room-air circulation, automatic thermostat operation, or adjustable speed.
- Voltage:115 V AC
- Airflow:146 CFM
- Wattage:86.25 W
- Power connector:3-pin
- Dimensions:6 x 6 x 5 in
- Material:Metal and plastic
- Included mounting part:Discharge mounting flange
- Speed controller compatibility:Not for use with speed controllers
Our verdict“Choose the DAYTON 1TDP7 for a compatible outdoor furnace draft replacement, and choose a stove-specific circulator such as the Hiorucet CB36 for room heating.”
Hiorucet CB36 Wood Stove Blower with Thermostat for US Stove US2000E, BEC95E, Country Hearth 2000, Ashley AW1120E, Vogelzang VG820E Heartwood and King 2007B, US Stove CB36 Circulatory Blower Kits.
For owners of a supported US Stove, Ashley, Vogelzang, or King model, the Hiorucet CB36 stands out because its thermostat switches the blower on near 120°F and off near 90°F. That automation is its clearest distinction from the S31105 replacement, which relies on a manual speed control. The CB36 is a complete 100 CFM kit with housing, heat shield, cord, wiring, mounting hardware, and rheostat, so it is aimed at a model-specific replacement rather than a generic fan swap. Its airflow is lower than the Dayton 1TDP7’s listed 146 CFM, but the Dayton is an outdoor-furnace draft fan and is not a comparable room-circulation kit. Compatibility is the deciding factor: the long model list is useful, but buyers should match their stove before ordering.
Pros:- Thermostat starts near 120°F and shuts off near 90°F.
- Complete kit includes housing, heat shield, cord, wiring, rheostat, and mounting hardware.
- 100 CFM blower is specified for room-air circulation around compatible stoves.
- Broad compatibility list covers several US Stove family brands and models.
Cons:- Fit depends on matching the exact stove model and mounting arrangement.
- Single listed power level offers less operating flexibility than the variable-speed S31105.
- Listed airflow is lower than the Dayton 1TDP7, though that unit serves a different furnace-draft role.
Best for: Owners of a listed US Stove, Ashley, Country Hearth, Vogelzang, or King stove who want a complete replacement kit with automatic temperature switching.
Not ideal for: Owners of unlisted stove brands or anyone needing higher airflow than the specified 100 CFM.
- Airflow:100 CFM
- Wattage:31 W
- Thermostat on temperature:Approximately 120°F
- Thermostat off temperature:Approximately 90°F, ±5°F
- Power source:Corded electric
- Material:Metal
- Included controls:Thermostat switch and rheostat with knob
- Included components:Housing, blower, cord, heat shield, wiring, and mounting hardware
Our verdict“Pick the CB36 if your stove is on its compatibility list and you want automatic temperature-based operation in a complete kit.”
Replacement Wood Stove Blower, S31105 Blower Fan for GHP Group, Monessen/Majestic (MHSC Brands), Majestic Dutchwest Windsor, CFM US Century Plate Steel Freestanding Wood Stove Fireplace
The S31105 kit is a practical fit for owners of supported GHP, Monessen/Majestic, Dutchwest Windsor, or CFM freestanding stoves who want manual control over airflow and noise. It includes the blower, gasket, screws, a six-foot cord, and a variable-speed rheostat, giving it more hands-on adjustment than the thermostat-led Hiorucet CB36. The tradeoff is that it will not switch itself on as the stove heats; the user controls the fan. Its stated 9.5-inch guarded length and four-hole mounting pattern make fit verification important, especially across the many listed models. Compared with the Hiorucet PBAR-2427, this kit serves a broader set of stove families, while the PBAR is restricted to Pleasant Hearth units. Confirm the rear heat-shield layout before buying.
Pros:- Variable-speed control lets owners balance air movement and fan noise.
- Kit includes a six-foot cord, gasket, and four mounting screws.
- Lists compatibility across several GHP, MHSC, Windsor, and CFM stove families.
- Provides mounting dimensions and hole spacing to help check fit.
Cons:- Manual control requires the user to switch and adjust the blower.
- Compatibility depends on the rear heat-shield dimensions and hole pattern.
- No airflow rating is provided in the supplied product data.
Best for: Freestanding stove owners with a listed S31105-compatible model who want a replacement blower with manually adjustable speed.
Not ideal for: Buyers who want automatic thermostat operation or owners of stoves outside the specified compatible families.
- Voltage:110–120 V
- Wattage:25 W
- Speed:2,800 RPM
- Guarded dimensions:9.5 x 5.25 x 3.75 in
- Mounting hole spacing:8 in left to right; 4.75 in top to bottom
- Cord length:6 ft
- Control:Manual variable-speed switch
- Included parts:Blower, cord, gasket, four screws, and rheostat
Our verdict“Choose this S31105 kit for a listed freestanding stove when adjustable manual airflow matters more than automatic thermostat control.”
Quiet Wood Stove Blower Fan for England’s Stove, AC-16 Wood Stove Convection Blower for Englander/England Wood Stoves 30-NC 17-VL 10-CDV 13-NC
This AC-16 replacement is the focused choice for owners of compatible Englander freestanding stoves, including the listed 30-NC, 17-VL, 10-CDV, and 13-NC models. Its two-speed low/high switch gives straightforward control, while the listing emphasizes a low-vibration motor and specifies a 45 dB noise level. That makes it a more targeted alternative to the S31105, which covers different stove families and includes variable-speed control. The AC-16 is not universal: the supplied fit notes exclude insert models and certain radiant and coal stoves, so the model and stove type both matter. It includes a 90-inch cord and blower assembly, but the provided information does not list an airflow rating or mounting hardware. Treat compatibility as the first filter, then weigh the basic two-speed control against a more adjustable kit.
Pros:- Designed as an AC-16 replacement for a substantial list of Englander stove models.
- Two-speed low/high switch keeps operation simple.
- Specified 45 dB noise level and low-vibration motor design.
- Includes a 90-inch power cord and blower motor assembly.
Cons:- Not for insert models and excludes several radiant and coal stove models.
- Two fixed speeds provide less adjustment than the S31105 variable-speed control.
- No airflow rating or included mounting hardware is specified.
Best for: Owners of a compatible Englander freestanding wood stove replacing an AC-16 or AMP20070 room-air blower.
Not ideal for: Owners of stove inserts, excluded radiant or coal models, or buyers who need a stated CFM rating or variable-speed adjustment.
- Voltage:115 V
- Current:0.8 A
- Frequency:60 Hz
- Speed:3,000 RPM
- Wattage:92 W
- Noise level:45 dB
- Speeds:2; low and high
- Cord length:90 in
Our verdict“Choose this AC-16 when your Englander freestanding stove is confirmed compatible and you want a simple two-speed replacement.”
Hiorucet Speed Variable PBAR-2427 Fireplace Blower Fan Kit for Pleasant Hearth Vent Free Stove or Wood Burning Stoves, GHP Group VFS2-PH30DT VFS2-PH20DT VFS-PH20DT, 3200RPM Improve Heating Efficiency.
The Hiorucet PBAR-2427 is a brand-specific blower kit for listed Pleasant Hearth vent-free stoves and fireplaces. Its 3,200 RPM motor and manual variable-speed switch let owners tune circulation, while the included gasket, screws, cord, and instructions make this a more complete package than a motor-only replacement. Unlike the Hiorucet CB36, it does not use a thermostat to switch on and off with stove temperature; speed is set by hand. The supplied data also gives dimensions and a 71-inch cord, useful for checking clearance and outlet reach. Compatibility is the main constraint: the listing warns against fitting it to other manufacturers’ units, even though its description uses broad wood- and pellet-stove language. Match the exact Pleasant Hearth model before choosing it.
Pros:- Manual variable-speed control allows airflow adjustment.
- Kit includes blower, cord, gasket, four screws, and installation instructions.
- Specified dimensions and cord length help with installation planning.
- Designed for listed Pleasant Hearth VFS and VFS2 models.
Cons:- The listing restricts use to compatible Pleasant Hearth units.
- Manual operation lacks the automatic temperature switching of the Hiorucet CB36.
- No airflow rating is provided in the supplied product data.
Best for: Pleasant Hearth vent-free stove owners with a listed VFS or VFS2 model who want a complete manually adjustable blower kit.
Not ideal for: Owners of other stove brands or buyers who want thermostat-controlled operation.
- Dimensions:9.75 x 3.62 x 5.25 in
- Voltage:110–120 V AC
- Frequency:60 Hz
- Speed:3,200 RPM
- Wattage:35 W
- Cord length:71 in
- Control:Manual variable-speed switch
- Included parts:Blower, power cord, gasket, four screws, and instructions
Our verdict“Choose the PBAR-2427 for a confirmed Pleasant Hearth model when you want adjustable manual circulation in a complete kit.”
Pleasant Hearth Stove Blower
Purpose-built compatibility is the main reason to choose this blower: it is designed and certified for Pleasant Hearth vent-free and wood-burning stoves. That makes it a more direct fit for those owners than the KUNRISE centrifugal fan, which is a general-purpose unit that needs airflow to be directed into the right place. Variable heat control gives you a way to adjust circulation as conditions change, while the included six-foot cord and installation hardware reduce the need to source basic parts separately. The tradeoff is narrow compatibility; the listing does not identify specific stove models, airflow, or motor specifications. Buyers with an Englander stove should look at the AC-16 replacements instead, which list compatible models. This pick makes the most sense when your Pleasant Hearth stove is confirmed compatible.
Pros:- Designed and certified for Pleasant Hearth vent-free and wood-burning stoves
- Variable heat control allows adjustment of blower output
- Six-foot power cord is included
- Installation hardware is included
Cons:- Compatibility is limited to Pleasant Hearth stoves
- Listing provides no airflow, voltage, or motor details
- One-year warranty is the only stated warranty coverage
Best for: Pleasant Hearth vent-free or wood-stove owners who want a brand-specific blower with adjustable heat control and included installation hardware
Not ideal for: Owners of other stove brands, or buyers who need stated airflow and motor specifications to confirm fit
- Compatible stove brand:Pleasant Hearth
- Stove types:Vent-free stoves and wood-burning stoves
- Heat control:Variable
- Power cord length:6 feet
- Installation hardware:Included
- Warranty:1 year
Our verdict“Choose this for a compatible Pleasant Hearth stove when brand-specific fit and adjustable heat control matter more than detailed performance specifications.”
KUNRISE BBQ 97mm × 33mm Blower Fan, High Airflow 110V 120V Variable Speed Centrifugal Fan with AC Plug for Camping, Charcoal Ignition, Outdoor Cooking, Fireplace, Bellows or Wood Stove
Flexible placement sets the KUNRISE apart from stove-specific replacements: its collection port can accept an extension duct or direct air toward a fire, so it can serve a wood stove, grill, or campfire. The controller offers a broad 700 to 3500 RPM range, giving buyers more adjustment than the three-position AC-16 blowers for Englander stoves. That flexibility comes with a fit tradeoff: this is a compact centrifugal fan, not a replacement kit matched to a stove model, so mounting and airflow direction may take extra planning. Its stated 3.3-watt power and 0.5-amp current also describe a small fan rather than a high-output room circulation system. Choose it for directed, multi-use airflow; for a fixed Englander installation, the Criditpid AC-16 is the more tailored option.
Pros:- Variable speed spans 700 to 3500 RPM
- Collection port supports duct attachment or directed airflow
- Finger guard grille helps shield fingers from the fan
- Dual-ball bearings are listed with a 40,000-hour lifespan
Cons:- No stove-specific mounting or compatibility list is provided
- At 3.3 watts, it is a small utility fan rather than a stated high-output room blower
- Listing gives no airflow rating in CFM
Best for: Campers and homeowners who need a compact, adjustable fan for directing air to a wood stove, fire pit, grill, or other small ventilation task
Not ideal for: Buyers seeking a stove-specific replacement blower or a clearly specified high-capacity room-circulation unit
- Dimensions:150 × 97 × 33 mm (5.9 × 3.82 × 1.3 in)
- Power:3.3 W
- Speed range:700–3500 RPM
- Bearings:Dual ball
- Included controls:3 V to 12 V multi-speed controller
- Airflow outlet:Collection port for directing airflow or connecting extension ducts
Our verdict“Pick the KUNRISE when you want adjustable, directed airflow for multiple fire and ventilation uses and can handle the fit yourself.”
AC-16 Wood Stove Convection Blower for Englander Stove, Room Air Blower Replacement for Englander 30-NC, 17-VL, 10-CDV, 13-NC Pellet & Wood Stoves
For a listed Englander model, this AC-16 replacement offers a more defined match than the general-purpose KUNRISE fan: it names a range of compatible stoves and is built for convection, moving warm air around the room. Its three-position switch gives off, low, and high settings, which are simpler to operate than continuously variable control. The copper motor and sealed ball bearings are presented as durability and smooth-running features, while the listing also gives concrete electrical details, including 115 volts and 92 watts. The tradeoff is that the switch offers fewer adjustment steps than the variable-speed Criditpid AC-16. Compatibility also needs checking against the exact stove model and mounting arrangement. This pick suits owners who want a model-specific replacement with clearly stated power details.
Pros:- Lists compatibility with numerous Englander stove models
- Three-position switch provides off, low, and high settings
- Pure copper motor and sealed ball bearings are specified
- Electrical ratings include 115 volts and 92 watts
Cons:- Three settings provide less fine adjustment than variable-speed AC-16 alternatives
- Plastic blades may be less robust than metal alternatives
- Exact model and mounting compatibility still need confirmation
Best for: Englander stove owners whose exact freestanding or listed model uses an AC-16 convection blower and who prefer simple low/high operation
Not ideal for: Owners of unlisted stove models or buyers who want continuous speed adjustment rather than three switch positions
- Replacement type:AC-16 convection blower
- Compatible stove models:Includes Englander 10-CDV, 12-FP, 13-NC, 13-NCI, 17-VL, and 30-NC
- Voltage:115 V
- Wattage:92 W
- Speed:3000 RPM
- Speed control:Three-position switch: Off, Low, High
- Motor:Pure copper, brushed
- Blade material:Plastic
- Certification:UL listed in product information
Our verdict“Choose this AC-16 when your Englander model is on the compatibility list and you want straightforward three-position convection control.”
Criditpid AC-16 Wood Stove Convection Blower for Englander Stove, Room Air Blower Replacement for Englander Pellet & Wood Stoves.
The Criditpid AC-16 is aimed at owners replacing a worn or noisy blower on a compatible Englander stove, and its listing adds a useful fit warning: it is for freestanding models, not inserts, and excludes specified radiant stoves. That extra detail makes model checking especially important, though the long compatibility list covers many Englander series. Like the Aibabcue AC-16, it runs at 3000 RPM and uses a three-position off/low/high switch; unlike the KUNRISE, it is a built-in replacement rather than a general-purpose fan with a collection port. The listing specifies a 90-inch wire with triangle plug and a 115-volt, 0.8-amp motor. Its UL certification and one-year warranty are stated, but the product data does not name wattage or a detailed airflow rating.
Pros:- Broad compatibility list includes multiple Englander stove series
- Explicitly identifies insert and radiant-stove exclusions
- 90-inch wire with triangle plug is specified
- UL certification and one-year warranty are stated
Cons:- Compatibility excludes inserts and certain radiant stove models
- Three-position switch offers less adjustment than continuously variable fans
- No wattage or airflow rating is listed
Best for: Owners of listed freestanding Englander wood stoves who need an AC-16 replacement and can verify the plug, mount, and model details
Not ideal for: Owners of stove inserts, excluded radiant stove models, or buyers who cannot confirm that their unit uses the AC-16
- Replacement part:AC-16
- Compatible models:Includes Englander 10-CDV, 12-FP, 13-NC, 17-VL, and 30-NC series
- Stove fit:Freestanding models only; not for inserts
- Voltage:115 V
- Frequency:60 Hz
- Current:0.8 A
- Speed:3000 RPM
- Wire length and plug:90 inches with triangle plug
- Speed control:Three-position switch: Off, Low, High
Our verdict“Pick this AC-16 for a compatible freestanding Englander stove when its detailed fit exclusions and long lead match your installation.”
How We Picked
I judged every blower in this roundup on five factors, weighted in this order: fit accuracy, airflow and heat distribution, noise, installation effort, and durability of the motor and bearings. Fit came first because a blower that doesn’t bolt into your stove’s mounting bay is useless regardless of its CFM rating — so I verified each model’s stated compatibility list and flagged where brand-specific mounting hardware is included or assumed. Airflow was judged against the job: a room circulator needs a different CFM profile than a flue-pipe heat reclaimer or an outdoor furnace draft fan, so I compared each unit against peers in its own role rather than across the whole field.
Ranking also reflected added control features. Models with thermostats or variable speed controls placed above bare replacements because they reduce motor wear and let you balance noise against output. Finally, I penalized listings with vague fit descriptions or motors with exposed windings and no sealed bearings, since blower motors live in the hottest, dustiest spot in the house. Universal-fit models were ranked on versatility and build instead of exact fit, which is why they occupy the mid and lower tiers rather than the top spots.
Factors to Consider When Choosing Wood Stove Blowers
Before buying any blower, it helps to understand what actually separates a satisfying purchase from a return-label headache. Wood stove blowers are not one-size-fits-all appliances — they fall into three distinct categories (convection circulators, flue-pipe heat reclaimers, and universal fans), and the mistakes buyers make almost always come from confusing one category for another.Know Your Stove’s Blower Bay Before Anything Else
The single most common mistake is buying a blower by CFM rating alone, only to find it doesn’t bolt to the stove. Most plate steel stoves from US Stove, Ashley, Vogelzang, Englander, and Pleasant Hearth have a specific mounting bay designed around one blower model — the CB36, AC-16, or S31105 in most cases. Check the sticker or plate on the back of your stove, or the manual, for the blower part number before shopping. If your stove has no blower bay at all, you need a different solution entirely, which leads to the next section.
Circulator vs. Heat Reclaimer vs. Universal Fan
These three categories get mixed together under ‘wood stove blower’ but do different jobs. A circulator blower mounts to the stove and pushes air across the firebox — best for even room heating. A flue-pipe heat reclaimer like the HR-6 mounts in the chimney pipe and extracts heat from exhaust gases — the only real option for stoves with no blower mount, though it slightly reduces draft and can creosote-foul if the stove is run cold. A universal centrifugal fan is a DIY tool — versatile, but you’re responsible for mounting, wiring, and clearances. Buyers who match the category to their situation avoid nearly all returns in this space.
Why a Thermostat (or Variable Speed) Is Worth Paying For
A bare blower runs whenever it’s plugged in, which means it blows cold air every time you light a fire and keeps spinning after the stove dies down — both waste heat and wear the motor. A thermal snap-disc switch turns the blower on only once the firebox reaches temperature and off again as it cools. Variable speed control, like on the DN104 and PBAR-2427 kits, lets you throttle airflow to match the fire instead of choosing between full blast and off. If your stove’s factory blower lacks either, upgrading to a kit that includes them is one of the few genuinely worthwhile premium steps in this category.
CFM Ratings and What They Actually Deliver
Manufacturers quote CFM (cubic feet per minute) figures that look impressive but are measured at free air, not against the back pressure of a stove’s air channels. A 130 CFM reclaimer and a 400 CFM squirrel cage blower can feel similar in a living room because the squirrel cage loses much of its rating once mounted. As a rough guide, 75–160 CFM suits a single room, while open floor plans or long stove-to-couch distances call for more. Also know that airflow and noise climb together — the high-velocity models in this roundup are loud enough that many owners end up running them on a speed controller anyway.
Motor Quality and Bearing Type
Blower motors operate inches from a firebox that cycles between room temperature and several hundred degrees, and that thermal cycling is what kills them — not runtime. Sealed ball bearings outlast sleeve bearings by a wide margin here, and a motor with a thermal overload protector will shut itself down instead of burning out when the stove is overfired. Look for CSA/UL-listed motors from established names (Fasco, Dayton) when possible; the generic replacements are often physically identical to OEM units but vary in winding quality. This is also why I favor listings that include the wiring harness and mounting hardware — a mismatched harness can cause the kind of voltage drop that slowly cooks a motor.
Installation Reality Check
Most circulator blowers are a 30-minute job: bolt to the bay, route the cord to an outlet, done. But there are gotchas. Some stoves require removing a rear access panel or routing the power cord through a specific grommet to keep it away from hot surfaces — a cord resting against the firebox is a genuine fire hazard. Universal fans and furnace blowers need hardwiring or a DIY mount, which introduces clearance questions: any fan should mount where it moves air across the stove, not blow directly at the door gasket. If you’re not comfortable with basic wiring and stove anatomy, the plug-in thermostatic kits are the safer and easier path.
Frequently Asked Questions
How do I know which blower fits my specific wood stove?
Start with the stove, not the blower. Look for a model number plate on the back or bottom of the stove, then search the manufacturer’s parts diagram for ‘blower’ or ‘convection fan’ — that part number is your answer. The common ones map like this: US Stove, Ashley, King, Vogelzang, and Country Hearth plate stoves mostly use the CB36; Englander and England’s Stove Works units use the AC-16; older GHP Group, Monessen/Majestic, and CFM Century stoves use the S31105/DN104. If the number is worn off, compare the mounting bolt pattern and housing dimensions against the listing photos before ordering, and buy from a seller with hassle-free returns in case the match is off.
Is a heat reclaimer like the Vogelzang HR-6 as good as a built-in blower?
They do different jobs and one isn’t strictly better. A built-in circulator pushes air across the firebox and distributes heat that’s already in the room; a reclaimer sits in the flue pipe and pulls heat out of exhaust gases that would otherwise go up the chimney, which typically recovers more total heat. The tradeoff is that reclaimers cool the flue gases, which slightly weakens draft and can accelerate creosote buildup if you regularly run the stove smoldering. If your stove already has a blower bay, use it. If it doesn’t, the HR-6 is the practical option — just stay on top of chimney cleaning.
Why does my new blower blow cold air when I first light the stove?
Because it’s running before the stove is hot, which is exactly the problem thermostat-equipped kits solve. A blower without a thermal switch runs the moment it’s plugged in, so it circulates cold room air during the first 15–30 minutes of a fire and keeps pushing cooling air after the fire dies. A snap-disc thermostat (included with the Hiorucet CB36 kit) mounts near the firebox and only powers the blower once the stove reaches roughly 110–140°F, then shuts it off as it cools. If your blower has no thermostat, you can buy an aftermarket thermal switch and wire it inline for a few dollars — or just get in the habit of plugging the blower in only after the fire is established.
Can I use a universal fan like the KUNRISE or squirrel cage blower instead of an OEM replacement?
You can, but only if you’re comfortable fabricating a mount and managing clearances. Universal centrifugal fans are designed without a specific stove in mind, so nothing lines up with your stove’s blower bay — you’ll need brackets, a heat-safe mounting location, and often a speed controller, since these fans run at full power constantly. Where they genuinely shine is non-standard situations: feeding air to an outdoor furnace, boosting circulation across a long room, or even lighting charcoal. For a stove that has an OEM blower available, the drop-in replacement is almost always the less frustrating path.
How much noise should I expect, and can I quiet a loud blower?
Expect anywhere from a soft hum to a noticeable drone depending on design. Low-CFM circulators like the CB36 and AC-16 are generally quiet enough to talk over, while high-velocity squirrel cage and 3200 RPM centrifugal fans are loud enough to compete with television at full speed. Two things quiet any blower: a variable speed control, which lets you run at 60–70% power for a fraction of the noise, and cleaning — accumulated ash in the blower wheel is the most common cause of new rattles and rumbling. If noise is a priority in a living space, pick a variable-speed model from the start rather than a fixed-speed fan you’ll end up tolerating.
Conclusion
The right wood stove blower depends almost entirely on what’s sitting in your living room. For most buyers, the Hiorucet CB36 kit with thermostat is the best overall pick — it fits the huge family of US Stove, Ashley, King, Vogelzang, and Country Hearth plate stoves, and the included thermal switch makes it genuinely hands-off. For best value, the Parts Kit DN104/S31105 covers older GHP, Majestic, and Century stoves at a straightforward replacement price with variable speed included.
For best premium, the Vogelzang HR-6 heat reclaimer is the most engineered solution here — fully sealed from flue gases, automatic, and the only option that adds heat recovery rather than just distribution, making it the pick for stoves with no blower bay at all. Beginners should stick with plug-in circulator kits (the CB36 or the AC-16 for Englander owners) since they bolt in with basic tools and need no wiring knowledge. For specific needs: Englander 30-NC and 13-NC owners should compare the three AC-16 variants on cord length and mounting hardware, Pleasant Hearth vent-free stove owners are best served by the PBAR-2427 kit, and DIYers with outdoor furnaces or no standard stove mount should look at the Dayton 1TDP7 or the high-velocity squirrel cage blower. Measure twice, check that model plate, and the right choice usually makes itself.
Fall Picks
fall essentials
As an affiliate, we earn on qualifying purchases.
